Chiller Contractor in Saudi Arabia for Industrial and Commercial Cooling
In Saudi Arabia, the chiller plant is usually the single largest energy consumer in a building and the system that cannot be allowed to fail in July. Saudi ProTech is an HVAC contracting company that designs, supplies, installs, commissions and maintains air-cooled and water-cooled chiller plants for factories, food plants, hospitals, hotels, malls and government buildings across the Kingdom, with teams serving Jeddah, Riyadh, Dammam and Khobar.
With more than 25 years in MEP contracting, our engineers have delivered chilled water systems for food processing plants, pharmaceutical facilities, stadiums and holy-site projects, so we understand both the engineering and the operating realities of running chillers in 50°C summers.
Our Chiller Services
Chiller Plant Design and Selection
We size the plant from a proper cooling load calculation, not a rule of thumb. That includes choosing between air-cooled and water-cooled chillers, screw, scroll or centrifugal compressors, N+1 redundancy, primary/secondary or variable primary pumping, and thermal storage where it makes sense. Equipment is selected for high-ambient Saudi conditions and to meet Saudi Building Code (SBC 601) energy requirements.
Chiller Supply and Installation
Our scope covers rigging and setting the chillers, chilled water and condenser water piping, pumps, valves, expansion tanks, air separators, insulation and cladding, cooling towers for water-cooled plants, and the power and control wiring back to the MCC and BMS.
Testing, Balancing and Commissioning
Every plant is flushed, pressure tested, water-balanced and commissioned with the manufacturer. We verify flow rates, delta-T, capacity at design conditions and control sequences before handover, and provide as-built drawings, O&M manuals and operator training.
Chiller Maintenance and Repair
Our HVAC maintenance teams service chillers we installed and plants installed by others: planned preventive maintenance, condenser and evaporator tube cleaning, refrigerant leak testing and charging, oil analysis, compressor overhaul, controls troubleshooting and emergency breakdown response. See our guide to chilled water system maintenance and energy optimization.
Chiller Replacement and Plant Upgrades
Older plants can often cut energy use substantially with high-efficiency chillers, VFDs on pumps and cooling tower fans, and optimized plant controls through the BMS. We plan replacements in phases so the building stays cooled during the works.
Air-Cooled vs Water-Cooled Chillers in Saudi Arabia
Air-cooled chillers are simpler, need no cooling tower or make-up water, and suit most commercial buildings, warehouses and sites where water is expensive or scarce. Their efficiency drops as outdoor temperature rises, so units must be rated for high ambient conditions.
Water-cooled chillers with cooling towers are more efficient and better suited to large plants such as factories, hospitals, district cooling and big malls, but they need a plant room, water treatment and more maintenance. We help you compare both on lifetime cost, not just purchase price. Read more on the benefits of chilled water systems in Saudi Arabia.
Chiller Projects Delivered by Saudi ProTech
- Jeddah Super Dome: chilled water, air handling units and BMS.
- Almarai Lusine 4B, Jeddah: HVAC and BMS design and build with chilled water system.
- Memories Biscuit Factory: chilled water and electrical works.
- Ravago Factory, Al-Jubail: chillers, chilled water and AHUs.
- Mataf Extension, Makkah and Makarem Ajyad Hotel: chillers and air handling.
- Tabuk Pharmaceuticals Factory: chillers and AHUs for controlled environments.
Browse all completed MEP projects.
Chiller Services in Jeddah, Riyadh, Dammam and Khobar
Our head office is in Jeddah and we deliver chiller installation and maintenance projects across the Kingdom, including Riyadh, Makkah, Madinah, Rabigh, Yanbu and the Eastern Province (Dammam, Khobar and Jubail).
Chiller Plant Engineering and Execution Scope
A chiller is only as good as the plant around it. Our scope covers the whole chilled water system, not just the machine:
- Equipment selection and technical evaluation: air-cooled or water-cooled, screw or centrifugal, rated at real Saudi peak conditions and the part-load profile of your building.
- Chilled water piping and hydraulics: primary/secondary or variable primary flow, pipe sizing, balancing valves and expansion and air separation.
- Pumps and associated plant: chilled and condenser water pumps with VFDs, cooling towers, heat exchangers and water treatment.
- Controls and BMS integration: chiller sequencing, differential pressure control and plant monitoring through the building management system.
- Electrical coordination: starters, power supply capacity and control wiring agreed with the electrical contractor and SEC requirements.
- Testing, commissioning and performance verification: flow balancing, control sequence testing and recorded performance before handover.
Chiller plants by facility type
Office towers need efficient part-load operation. Factories need process temperatures that do not drift. Hospitals need N+1 redundancy. Hotels need quiet, round-the-clock reliability. Malls need capacity for tenant fit-outs. The right configuration depends on building load, operating hours, redundancy needs, plant space and the project specification. We size each plant for its real use, not a rule of thumb.
Frequently Asked Questions About Chillers
How often should a chiller be serviced in Saudi Arabia?
Most plants need monthly operational checks, quarterly preventive maintenance and an annual major service including tube cleaning and refrigerant and oil checks. Plants running 24/7, such as hospitals and food factories, usually need closer monitoring.
How long does chiller installation take?
A single packaged air-cooled chiller replacement can take a few days once equipment is on site. A new water-cooled plant with cooling towers, pumps and piping typically takes several weeks to a few months depending on size and access.
Do you maintain chillers from all brands?
Yes. Our technicians maintain the major chiller brands used in Saudi Arabia and work with the manufacturer for warranty-related work and spare parts.
Can you reduce our chiller plant energy bill?
Usually, yes. Tube cleaning, water treatment, correct setpoints, VFDs and plant sequencing through the BMS often deliver meaningful savings without replacing the chillers.
What information is needed before specifying a chiller system?
The building cooling load profile (peak and part-load), operating hours, required chilled water temperatures, redundancy needs, available plant space, power supply capacity, and whether water for cooling towers is available.
Can multiple chillers run from one control system?
Yes. A plant controller or the BMS stages chillers on and off according to load, rotates duty, and controls pumps and cooling towers, which keeps the plant efficient at part load.
What documents should be handed over after chiller commissioning?
Commissioning and performance test reports, water balancing records, control sequence descriptions, as-built drawings, O&M manuals, warranty certificates and a recommended maintenance schedule.
Guides
- Chiller maintenance checklist for Saudi Arabia
- Commercial chiller selection guide
- Cooling tower maintenance & water treatment
- VRF vs chiller for office buildings
Request a Chiller Site Visit
Tell us about your building, cooling load and current plant, and our engineers will recommend the right chiller solution. Call +966 12 672 0003 or +966 12 673 8136, email info@saudiprotech.com, or send us your project details.




